2PC New Original Graphtec FC7000-60/75/100/130/160 Cutting Strip / Cutting Mat
Cutting pad strip, sticker (single layer) width 4mm. Trip is cut through, it requires a long blade to cut through, and the corners are prone to p. Hooks, which cannot be cut well and affects the service life of the knife. Tear off the old gasket, clean the double-sided adhesive, and then apply the new gasket, paying attention to alignment.
admin November 9th, 2024
Posted In: original
Tags: cutting, fc7000-6075100130160, graphtec, original, strip
2PC Original Graphtec FC8600 / FC8000 Series Plotter Cross Cutting Blade
Accessory Name: FC8600/FC8000 Paper Cutting Knife, Last Knife, Horizontal Cutting Knife, Suitable for All Series Models. The blade is not sharp, the paper cannot be cut off, or the cutting is good on one side but poor on the other, or the edges are rough and easy to get stuck, causing the machine to stop and sound an alarm. Unscrew the large black screw on the pen carriage and remove the black bracket; Unscrew the screws on the black bracket and replace the blade. The common fault phenomena encountered during the execution of FC8600/FC8000 cutting are as follows. Continuous cutting; You can increase the cutting pressure of the paper cutter. Use a carving knife to cut paper without using a paper cutter; Adjust the position of the pen car striker. Use a horizontal cutting knife instead of a engraving knife for cutting; Adjusting the position of the pen car striker.
admin November 2nd, 2024
Posted In: original
Tags: blade, cross, cutting, fc8000, fc8600, graphtec, original, plotter, series
1PC New and Original Graphtec CE1000 Series Cutting Plotter LCD Screen
Original Graphtec CE1000 LCD Screen Display for Graphtec Carving Plotter Screen. Graphtec CE1000 display LED screen. Use for -Graphtec CE1000 all series cutting plotter. Trouble phenomenon: LCD screen does not display, display is incomplete, LCD screen is broken, wire breaks, etc.
admin August 29th, 2024
Posted In: original
Tags: ce1000, cutting, graphtec, original, plotter, screen, series
OPH-A45 Original Graphtec CE7000-40 CE7000-60 Carrier Sheet Cutting Table
OPH-A45 Original Graphtec CE7000-40 CE7000-60 Carrier Sheet Cutting Table. Attention: A set of 4, two at the front and. Two at the back.
admin May 11th, 2024
Posted In: oph-a45
Tags: carrier, ce7000-40, ce7000-60, cutting, graphtec, oph-a45, original, sheet, table
2PC New Original Graphtec CE7000-40/60/130/160 Cutting Strip / Cutting Mat
Cutting pad strip, sticker (single layer) width 5-10mm. Graphtec CE7000 series engraving machine, 40/60-10mm. After the cushion strip is cut through, it requires a long blade to cut through, and the corners are prone to paper hooks, which cannot be cut well and affects the service life of the knife. Tear off the old gasket, clean the double-sided adhesive, and then apply the new gasket, paying attention to alignment.
admin April 24th, 2024
Posted In: original
Tags: ce7000-4060130160, cutting, graphtec, original, strip
Original PHP34-BALL Pen Blade Holder For Graphtec CE7000 130AP Cutting Plotter
Original PHP34-BALL Pen Blade Holder For Graphtec CE7000 130AP Cutting Plotter.
admin March 11th, 2024
Posted In: original
Tags: 130ap, blade, ce7000, cutting, graphtec, holder, original, php34-ball, plotter
2PC/SET Original Cutting Mat For GRAPHTEC CE5000-40 / 60 / 120
Original Graphtec CE5000 cutting mat. For Graphtec CE5000 Cutting mat strip width :20mm use for –for GraphtecCE5000 cutter Replacement method: tear off the old mat strip, clean up the double-sided tape, and then paste the new mat strip, paying attention to alignment.
admin February 13th, 2024
Posted In: 2pcset
Scrapping Out A Big And Old Air Compressor Cutting It Up With The 200 00 Amazon Plasma Cutter
admin February 1st, 2024
Posted In: scrapping
Tags: amazon, compressor, cutter, cutting, plasma, scrapping
2PC New Original Graphtec FC7000-60/75/100/130/160 Cutting Strip / Cutting Mat
Applicable model: Graphtec FC7000 series engraving m ach ine.
admin December 30th, 2023
Posted In: original
Tags: cutting, fc7000-6075100130160, graphtec, original, strip
4PC/LOT Original Graphtec CE7000-40 CE7000-60 Carrier Sheet Cutting Table
Original Graphtec CE7000-40 CE7000-60 Carrier Sheet Cutting T. This item is in the category “Computers/Tablets & Networking\Printers, Scanners & Supplies\Printer Ink, Toner & Paper\Empty Ink Cartridges”. The seller is “supply-ink-cartridge-printer” and is located in this country: CN. This item can be shipped worldwide.
- Compatible Brand: For Graphtec
- Print Technology: cutting plotter
- Orign: JP
- Color: Black
- Custom Bundle: No
- Compatible Model: For Graphtec CE7000-40 / 60
- MPN: CE7000
- Feature: Original and New
- MOQ: 4PC/SET
- Brand: Unbranded
- Item Name: Carrier Sheet Cutting Table
- Type: Carrier Sheet Cutting Table
- Manufacturer Warranty: 3 Months
- Model: Graphtec CE7000-40 / 60
- Shipping: DHL\\FEDEX
- Country/Region of Manufacture: Japan
- Use for: Graphtec CE7000-40 CE7000-60
admin November 7th, 2022
Posted In: 4pclot
Tags: 4pclot, carrier, ce7000-40, ce7000-60, cutting, graphtec, original, sheet, table