2PC Original Graphtec FC8600 / FC8000 Series Plotter Cross Cutting Blade
Accessory Name: FC8600/FC8000 Paper Cutting Knife, Last Knife, Horizontal Cutting Knife, Suitable for All Series Models. The blade is not sharp, the paper cannot be cut off, or the cutting is good on one side but poor on the other, or the edges are rough and easy to get stuck, causing the machine to stop and sound an alarm. Unscrew the large black screw on the pen carriage and remove the black bracket; Unscrew the screws on the black bracket and replace the blade. The common fault phenomena encountered during the execution of FC8600/FC8000 cutting are as follows. Continuous cutting; You can increase the cutting pressure of the paper cutter. Use a carving knife to cut paper without using a paper cutter; Adjust the position of the pen car striker. Use a horizontal cutting knife instead of a engraving knife for cutting; Adjusting the position of the pen car striker.
admin November 2nd, 2024
Posted In: original
Tags: blade, cross, cutting, fc8000, fc8600, graphtec, original, plotter, series
New Original Graphtec FC8600 FC8000 Pinch Roller Assy/Paper Pressure Roller Kit
New Original Graphtec FC8600 FC8000 Pinch Roller Assy/Paper Pressure Roller Kit.
admin July 23rd, 2024
Posted In: original
Tags: assypaper, fc8000, fc8600, graphtec, original, pinch, pressure, roller
Graphtec FC8000 FC8600 Registration Mark Sensor Board / Code Reading Sensor
FC8600 Registration Mark Sensor Board Edge Patrol Sensor Position For Graphtec FC8600 FC8000 Code reading sensor. Product Name: Code reading sensor. Suitable Printer: For Graphtec FC8600 FC8000. Feature: Brand new and original.
admin June 16th, 2024
Posted In: graphtec
Tags: board, code, fc8000, fc8600, graphtec, mark, reading, registration, sensor
New Origianl GRAPHTEC FC8600 / FC8000 Motherboard Network Card / I/F Panel, LAN
I/F Panel, LAN For GRAPHTEC FC8600.
admin April 29th, 2024
Posted In: origianl
Tags: card, fc8000, fc8600, graphtec, motherboard, network, origianl, panel
Original Graphtec FC8000 FC8600 Carriage Board / Pen Relay Board / Joint Board
New Original Graphtec FC8600 FC8000 Cutting Plotter Central Control Board Trolley Board for FC8000 FC8600 Cutter. Use for –GraphtecFC8600-60, FC8600-100, FC8600-130, FC8600-160, FC8000-60, FC8000-100, FC8000-130, FC8000-160. Notes:Usually when a fault occurs, the pen carriage board needs to be judged together with the Y line. Common faults: The pen car crashes and an alarm is issued. After the Y line is replaced, the fault remains the same. It is recommended to replace the pen car board. Of course, the Y motor failure is also possible.
admin April 14th, 2024
Posted In: original
Tags: board, carriage, fc8000, fc8600, graphtec, joint, original, relay
2PC Graphtec FC8000 FC8600 FC9000 CE7000 CE6000 Flange Media Holder OPH-A21
Graphtec FC8000 FC8600 FC9000 CE7000 CE6000 Flange Media Holder OPH-A21.
admin March 17th, 2024
Posted In: graphtec
Tags: ce6000, ce7000, fc8000, fc8600, fc9000, flange, graphtec, holder, media, oph-a21
1PC New Original Graphtec FC8000 8600 Base /FC8600 FC8000 Pinch Roller Assembly
Original Pinch Roller Base. For Graphtec FC8000 FC8600 Pinch roller assembly Pinch Roller Component. Parts name: FC8000, FC8600 pressure roller set assembly component fastener. Applicable models: FC8000, FC8600 full series. Feature : Original and New. Packing : Safety packing by cartoon box.
admin March 11th, 2024
Posted In: original
Tags: assembly, base, fc8000, fc8600, graphtec, original, pinch, roller
Original Pen Station Assy For Graphtec CE5000 CE3000 FC8600 FC8000 CE2000
Pen Station Assy For Graphtec CE5000-120AP. CE3000-120AP Applicable models: Graphtec CE2000-120AP, CE3000-120AP, CE5000-120AP, FC8000-100AP, FC8000-130AP, FC8000-160AP, FC8600-100AP, FC8600-130AP, FC8600-160AP. Note: This pen gripper is divided into left and right sides. The left pen gripper is installed on the trolley, and the right pen gripper is the fixed side. Please check the machine model when purchasing.
admin February 19th, 2024
Posted In: original
Tags: assy, ce2000, ce3000, ce5000, fc8000, fc8600, graphtec, original, station
Graphtec FC8600 Control Panel
Graphtec FC8600 Control Panel. Great part to upgrade your old version of FC8000 control panel. Installation instructions will be sent with the package. More available parts for any Graphtec models are available in our store.
admin February 14th, 2024
Posted In: graphtec
Original and New Graphtec FC8600 FC8000 Y Motor Use for FC8000 -60/100/130/160
New Original GRAPHTEC FC8000 FC8600 series Y motor suitable for -60\100\130\160. Applicable models: GRAPHTEC FC8600-60, FC8600-100, FC8600-130, FC8600-160, FC8000-60, FC8000-100, FC8000-130, FC8000-160.
admin January 20th, 2024
Posted In: original