2PC-Original-Graphtec-FC8600-FC8000-Series-Plotter-Cross-Cutting-Blade-01-dat
2PC Original Graphtec FC8600 / FC8000 Series Plotter Cross Cutting Blade
2PC Original Graphtec FC8600 / FC8000 Series Plotter Cross Cutting Blade

2PC Original Graphtec FC8600 / FC8000 Series Plotter Cross Cutting Blade
Accessory Name: FC8600/FC8000 Paper Cutting Knife, Last Knife, Horizontal Cutting Knife, Suitable for All Series Models. The blade is not sharp, the paper cannot be cut off, or the cutting is good on one side but poor on the other, or the edges are rough and easy to get stuck, causing the machine to stop and sound an alarm. Unscrew the large black screw on the pen carriage and remove the black bracket; Unscrew the screws on the black bracket and replace the blade. The common fault phenomena encountered during the execution of FC8600/FC8000 cutting are as follows. Continuous cutting; You can increase the cutting pressure of the paper cutter. Use a carving knife to cut paper without using a paper cutter; Adjust the position of the pen car striker. Use a horizontal cutting knife instead of a engraving knife for cutting; Adjusting the position of the pen car striker.
2PC Original Graphtec FC8600 / FC8000 Series Plotter Cross Cutting Blade

November 2nd, 2024

Posted In: original

Tags: , , , , , , , ,