Cutting pad strip, sticker (single layer) width 5-10mm. Graphtec CE7000 series engraving machine, 40/60-10mm. After the cushion strip is cut through, it requires a long blade to cut through, and the corners are prone to paper hooks, which cannot be cut well and affects the service life of the knife. Tear off the old gasket, clean the double-sided adhesive, and then apply the new gasket, paying attention to alignment.
admin April 24th, 2024
Posted In: original
Tags: ce7000-4060130160, cutting, graphtec, original, strip
This pen grabber is use. For three types of vertical cutting machines: Graphtec. CE2000-120AP, CE3000-120AP, and CE5000-120AP. Unable to grasp the pen; It may be necessa. Ry to adjust the spacing between the pens, or the pen gripper may be broken. The order of using knives and pens is reversed; Perhaps the pen grabber is broken, the pen is not properly placed, or the tip length is incorrect. Display’PAPER CUT ERROR'; it may be that the blade is too blunt to cut the paper, or the pen gripper is broken and the pen is not placed back on the fixed end. After replacing the pen gripper, adjust the spacing between the pens.
admin April 19th, 2024
Posted In: original
Tags: ce2000-120ap, ce3000-120ap, ce5000-120ap, grabber, graphtec, original
New Original Graphtec FC8600 FC8000 Cutting Plotter Central Control Board Trolley Board for FC8000 FC8600 Cutter. Use for –GraphtecFC8600-60, FC8600-100, FC8600-130, FC8600-160, FC8000-60, FC8000-100, FC8000-130, FC8000-160. Notes:Usually when a fault occurs, the pen carriage board needs to be judged together with the Y line. Common faults: The pen car crashes and an alarm is issued. After the Y line is replaced, the fault remains the same. It is recommended to replace the pen car board. Of course, the Y motor failure is also possible.
admin April 14th, 2024
Posted In: original
Tags: board, carriage, fc8000, fc8600, graphtec, joint, original, relay
New Original Roland SP-540 VP-540 VS-300 VS640 Pinch Roller Assy. ASSY, PINCH ROLLER L/R VP-540. SP-540V / VP-540 / VP-540i. VS-420 / VS-540 / VS-640. VS-300i / VS-540i / VS-640i.
admin March 31st, 2024
Posted In: original
Tags: original, pinch, roland, roller, sp-540, vp-540, vs-300i, vs-420, vs-540, vs300, vs640
1PC New Original Roland EGX-600 SPINDLE BOARD ASSY EGX-400- 7589353000. Feature : Original &Brand New Product Name. SPINDLE BOARD ASSY EGX-400. If you want to order in large quantities, you can contact me and I will give you the best price and the best service.
admin March 31st, 2024
Posted In: original
Tags: assy, board, egx-400600, egx-600, original, roland, spindle
Next Page »