Name: Cartridge chip resetter. Work: Just only work for Europe version and China version. Maintenance Box Part Number. How to use for reset? Align the chip with the corresponding groove of the chip resetter, so that the probe of the chip resetter corresponds to the contact of the chip on the ink cartridge, and the two components are closely attached. If the red light is on, it means the contact is correct and good. After about 5 seconds, the red light turns to green light, which means that the cartridge chip record has been refreshed. The ink cartridge can be used when it is filled with new dye ink or other brand / compatible ink. When the ink shows 100%, you cannot always restore it, or you will lock the number. When the ink level of the original chip is lower than 15%, the chip reset device must be used to reset the chip immediately, otherwise the ink cartridge will have an error message, and the original chip ink level will not be successfully reset when the ink level becomes empty. The chip of the original cartridge chip can be reset, but it must be reset when there is ink. A chip whose ink level is “empty” cannot be reset. The red indicator light is always on after flashing, and does not change to a green light. Reason 1: The probe of the chip reset device is not aligned with the contact of the chip, or the contact is dirty. Reason 2: If you are using a non-original Epson ink cartridge, the chip may not be in close contact with the needle. What models are available? For Epson SC-P700 P703 P704 P706 P708 printer. For Epson SC-P900 P903 P904 P906 P908 printer.
admin September 19th, 2023
Posted In: t46s
cartridge, chip, epson, p700, printer, resetter, sc-p900, series, t46s, t46y, t47a